Chart Recorders 
and Data Loggers

6877-1 Goreway Drive, Mississauga, Ontario, Canada L4V 1L9

Tel:  (905) 677-5533, Fax:  (905) 677-5030, e-mail:  rms@rmsinst.com
 

 

 

RMS  INSTRUMENTS manufactures a variety of chart recorders and graphic printers using advanced thermal array technology.  Based on sophisticated multi-processor architectures and firmware, these instruments can operate in stand-alone mode accepting signals directly from sensors, as peripheral devices under control of a computer or data acquisition system, or in a mode that combines the functionality of the two above.

In thermal printing, energy in the form of heat is transferred from miniature heating elements organized in an array along a printhead to the thermal recording medium.  Through carefully designed, proprietary firmware and hardware techniques, the system controls the energy applied to print elements and the timing of numerous signals that result in the printing of sharp graphic images, traces, text, and other forms of annotation all at print speeds up to 260 mm/sec, resolutions as high as 11.8 x 11.8 dots/mm (300 dpi), and on 321-mm wide print media.  By continuously adjusting print variables based on measurements of printhead temperature and print rates, outstanding photographic quality is achieved in images printed using the gray scaling capability of some models true gray scaling with 16 shades, in which the gray shade of each print element is individually modulated by the image data.  Superior-quality thermal media (paper and film) supplied by RMS INSTRUMENTS ensures outstanding print quality and longevity.   Application Note: RMS2030 Thermal Papers

Printing based on RMS INSTRUMENTS' thermal array technology is ideal for harsh environments in which instrumentation is exposed to wide temperature ranges and vibration.  Minimal maintenance and support are required.  Totally eliminated are the complicated mechanisms for pen positioning and control, paper movement, and the ensuing high maintenance cost, the need for replacement cartridges/ribbons, and the frequent problems such as smearing of ink and nozzle clogging associated with other technologies.

 

RMS INSTRUMENTS' Graphic Printer/Chart Recorder Quick Selection Guide

 

GR33A

GR34A

GR33AP

GR33U2

GR33U2S

GP300

Waveform channels

up to 32

up to 32

up to 32

2

2

up to 32

Logic (event) channels

6

6

6

0

0

16

Analog/Digital

Analog [1]

Digital

Analog [1]

Digital

Digital

Analog

Analog

Digital

Embedded signal conditioning modules

No

No

No

Yes

SCM5B-series

Yes

AC-voltage, frequency

No

Resolution

amplitude x time [dpi]

100 x 200

100 x 200

100 x 200

200 x 200

200 x 200

300 x 300

Chart Speed (max.)

0.32 in/sec

(8 mm/sec)

0.32 in/sec

(8 mm/sec)

0.32 in/sec

(8 mm/sec)

1.0 in/sec

(25 mm/sec)

1.0 in/sec

(25 mm/sec)

10.2 in/sec

(260 mm/sec)

Sampling rate

(per channel)

32 Hz [1]

( 31.25 kHz one channel 

[1], [2] )

32 Hz [1]

( 31.25 kHz one channel 

[1], [2] )

N/A

5 kHz

5 kHz

N/A

Embedded data logging

Yes [1], [2]

Yes [1], [2]

No

Yes

Yes

No

Gray scale plotting

No

No

No

No

No

Yes

Support SW:

-Setup and control

- Paperless real-time

  monitoring & logging

- C/C++ libraries

- Application examples

Yes

Yes

Yes

Yes

Yes

Yes

Support SW:

- Windows printer driver

No

No

No

No

No

Yes

Form Factor

 

(mm)

19" Rack Mount

5.25"h x 19.3"d

(482.6x133.4x490)

19" Rack Mount

10.5"h x 15.67"d

(482.6x266.8x398)

19" Rack Mount

5.25"h x 16.3"d

(482.6x133.4x414.5)

19" Rack Mount

5.25"h x 19.3"d

(482.6x133.4x490)

19" Rack Mount

5.25"h x 19.3"d

(482.6x133.4x490)

19" Rack Mount

5.25"h x 16.3"d

(482.6x133.4x414.5)

Power

28 VDC

115 or 220 VAC

 

115 or 220 VAC

 

23-32 VDC

110 or 220 VAC

85-250 VAC,

47-440 Hz

110-330 VDC

22-32 VDC

115 or 220 VAC

[1]    With RMS4185A Analog Input Module

[2]    With RMS4450 Transient Digitizer Module  


 

 

NEW GENERATION OF RMS INSTRUMENTS' 
GRAPHIC PRINTERS/CHART RECORDERS

GP300 Graphic Printer / Chart Recorder

  • Laser printer resolution (300 x 300 dpi)
  • Chart speeds to 260 mm/sec
  • 32 fully programmable waveform channels and 16 event channels
  • General-purpose printer for any Windows NT/2000 application
  • Graphic printer with 16 gray levels for each pixel
  • Support software for control, data monitoring & logging
  • Internal Take-up Spool
  • Outstanding reliability and low maintenance
  • GP300 Graphic Printer/Chart Recorder Data Sheet 

GR33A Graphic Recorder

  • Compact and lightweight, suitable for aircraft and mobile installations
  • 19 inch rack mount, 5.25 inches high (133.4 mm), 23 pounds (10.4 kg)
  • Simultaneous analog, digital and message recording
  • Traces expandable to full chart width, with wrap features
  • Parallel and RS232 interfaces standard
  • 4 setup tables - real-time clock/calendar
  • Optional interface modules - Intelligent 32-channel A/D with 16-bit resolution and 6 event inputs, intelligent ARINC, BCD,  IEEE-488
  • Transient digitizer , up to 31 kHz sampling
  • 28 VDC and 115 or 230 VAC
  • Reliable thermal array printing
  • PC compatible interface software
  • Data output via RS232 
 

GR33A Graphic Recorder Data Sheet



GR34A Graphic Recorder

  • Suitable for laboratory/industrial use, 19 inch rack mount, 10.5 inches (266.8 mm) high
  • Stand alone or fully controlled from a computer
  • Simultaneous analog, digital and message recording
  • 32 analog inputs featuring programmable gain, filters, offsets, set-points, etc.
  • Parallel and RS232 standard interfaces
  • 4 setup tables - real-time clock/calendar
  • Transient digitizer , up to 31 kHz sampling
  • Traces expandable to full chart width with wrap features
  • Optional interface modules - Intelligent 32-channel A/D with 16-bit resolution and 6 event inputs, intelligent ARINC, BCD,  IEEE-488
  • PC compatible interface software
  • 115 or 230 VAC operation
  • Reliable fixed head thermal printing
  • Data output via RS232
  • GR34A

    GR34A Graphic Recorder Data Sheet



    GR33AP Printer Plotter

    • Digital input version (serial & parallel) of the GR33A Graphic Recorder


    GR33U2S Chart Recorder/Data Logger

  • Wide selection of signal conditioning inputs, such as voltage, current, thermocouple, RTD, etc.
  • Two channels: 16-bit resolution, 500-Hz bandwidth. Real time monitoring on paper (up to 25 mm/sec) or via serial output (direct RS232 or modem)
  • Analog recording with alphanumeric printing
  • Simple operation - stand alone or from PC
  • Thermal array technology (8 dots/mm)
  • Battery backed data logger memory
  • Fully programmable
  • Low maintenance, reliable
  • Self-calibrating
  • AC/DC power
  • GR33U2S
     
     

    GR33U2S Chart Recorder/Data Logger Data Sheet



    GR33U2 Power Line Monitoring Recorder/Data Logger

    • Designed to monitor power line voltage and frequency fluctuations
    • Voltage (100-140 VAC) and frequency (55-65 Hz) inputs (other ranges available)
    • Two channels: 16-bit resolution, 500-Hz bandwidth. Real time monitoring on paper (up to 25 mm/sec) or via serial output (direct RS232 or modem) 
    • Analog recording with alphanumeric printing
    • Simple operation - stand alone or from PC
    • Thermal array technology (8 dots/mm)
    • Battery backed data logger memory
    • Fully programmable
    • Low maintenance, reliable
    • Self-calibrating
    • AC/DC power

     
     

    GR33U2 Power Line Monitoring Recorder Data Sheet



    E-Mail Need more info?
    Technical Notes
    Bulletin Board
    Return Home
    Optional Interfaces
    Thermal Paper
    Accessories